Caution : You must read this before you proceed Barcart Label Picture Description QTY A Bottom Tray 1 B Top Tray 1 C Back Frame 1 D Support Bar 2 E Wheel 2 Page 1 OF 5
Label ① Picture Description Bolt(M6*15) QTY 9 ② Bolt(M6*35) 9 ③ ④ Allen Key Wrench 1 1 Before Beginning Assembly: Overview Top Tray(B) Back Frame(C) Bottom Tray(A) Wheel(E) Support Bar(D) FRONT FACING This Trolley has multiple parts and may require up to some 30 minutes to assemble. To give you an overview of the Trolley parts, the above picture is to help you put the various parts into perspective.
Step 1 ④ Open the carton and place all the parts onto a clean, non-marring surface. Put Bottom Tray(A) facedown. Turn Wheels(E) fully into the two mounting positions using Wrench(④) as shown in the picture above. The Trolley parts are heavy, always have a second adult to assist you whenever lifting or moving them. Step 2 Step:2.1 C C Step:2.2 2.1) Align Bottom Tray(A) to the Back Frame(C). 2.2) Attach Bottom Tray(A) to Back Frame(C) using Bolts(②) with Allen Key(③) as shown in the picture above.
Step 4 Step:4.2 Step:4.1 Step:4.3 4.1) Align Top Tray(B) to Back Frame(C) and Support Bar(D) 4.2) Attach Top Tray(B) to Back Frame(C) using Bolts(②) with Allen Key(③) as shown in the picture above. 4.3) Attach Top Tray(B) to Support Bars(D) using Bolts(①) with Allen Key(③) as shown above. Do not fully tighten the Bolts. Step 5 Now in a sequential manner, proceed to tighten all Bolts at all joints. Note: DO NOT fully tighten a BOLT in one go and then move on to the next.
Do not put hot items directly on furniture surface Do not clean furniture with harsh cleansers or polish. To obtain the longest lifespan of your outdoor prodcts, minimizing exposure to direct sunlight is recommended. Children should not climb or jump on the furniture. Do not write on furniture without a padded barrier to protect the surface. To obtain the longest lifespan of your outdoor products, avoid extended and lengthy exposure to rain, snow, and direct sunshine.
