Instructions / Assembly

Step 3
Step 4
3.1) Attach the Left Armrest/Leg(B) to Backrest(D) using Bolts(③) with Allen Key(④) as shown
above.
3.2) Attach the Left Armrest/Leg(B) to Seat(C) using Bolts(①) with Allen Key(④) as shown above.
3.3) Attach the Left Armrest/Leg(B) to Seat(C) using Bolts(②) with Allen Key(④) as shown above.
Do not fully tighten Bolts.
Stand the Chair up. Place the Chair on a LEVEL SURFACE.
Inspect it and make sure all parts are adequately connected. Gently and carefully, sit onto the
Chair. This will help to align all parts at all joints. Then get off the Chair, and in a sequential
manner, proceed to tighten all Bolts.
When tightening the Bolts, tighten sequentially.
DO NOT tighten any Bolt fully and then move on to the next one. This may cause the frame
to warp. If there are still wobbles, loosen the Bolts and execute the same process.
If the Chair is not stable it could lead to damage to the product.
Your Chair is ready for use.
This Chair can only be used on a flat and level surface.
Step3.1
Step3.2
Step3.3
Page 4 OF 5