Assembly Instructions Caution : You must read this before you proceed. TABLE CAUTION : This table is NOT a TOY. Keep your child / children at bay during the assembly process. Parts list Description QTY A Table Top 1 B Table Leg with Pre-attached Levellers 4 C Central Round Support Ring 1 NO.
Hardware ① Washer(8mm) 13 ② Spring Washer(8mm) 13 ③ Hex Bolt (M8*30mm) 9 ④ Hex Bolt (M8*25mm) 5 ⑤ Spanner 1 Assembly Preparation Before Beginning Assembly: 2 OF 5
Assembly Step Overview Table Top(A) Central Round Support Ring(C) Table Leg with Preattached Levellers (B) FRONT FACING This Table has multiple parts and may require up to some 30 minutes to assemble. To give you an overview of the Table parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly. Unpack and place all parts on a clean soft surface.
Repeat step 2, attaching the remaining 3 legs to the Central Round Support Ring(C) DO NOT OVERTIGHTEN. Lay the Table Top(A), top facedown, onto a flat, soft, clean surface. Attach the Table Legs(B) to the Table Top(A) using Washers(①), Spring Washers(②) and Hex Bolt (④) with the Spanner(⑤). DO NOT OVERTIGHTEN. Adjust height for balance Adjust low for balance Stand the table rightside up. In a sequential manner, proceed to tighten up all screws.
What is Proposition 65? Proposition 65 is a California law that requires warning labels on products that may contain one of more than 800-plus chemicals or ingredients that the California Office of Environmental Health Hazard Assessment (OEHHA) has deemed to cause cancer or other reproductive toxicity.