Caution : You must read this before you proceed CHAIR CAUTION : This Chair is NOT a TOY. Keep your child / children at bay in the process of assembly. For turning the Chair and to prevent damage to the Chair, 02 persons may be needed to execute this action.
Caution : You must read this before you proceed CHAIR CAUTION : This Chair is NOT a TOY. Keep your child / children at bay in the process of assembly. For turning the Chair and to prevent damage to the Chair, 02 persons may be needed to execute this action.
A Right Leg Panel With Pre-installed Levelllers 1 B Left Leg Panel With Pre-installed Levelllers 1 C Seat Panel 1 D Backrest Panel 1 E Backrest Cushion 1 F Seat Cushion 1
Label Picture Description QTY ① Screw (M7*70mm) 7 ② Bolt (M6*35mm) 3 ③ Allen Key 1 Before Beginning Assembly:
Overview Backrest Cushion (E) Seat Cushion (F) Backrest Panel (D) Right Leg Panel With Pre-installed Levelllers (A) Left Leg Panel With Preinstalled Levelllers (B) Seat Panel (C) FRONT FACING This Chair has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the Chair parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly.
Unpack and place all parts on a clean, non-marring surface.
Attach mortise of Left Leg Panel With Pre-installed Levelllers (B) to tenon of the Seat Panel (C) Secure by using Screw (①) with Allen Key(③) Do not fully tighten the Screws. Step 3 A C With assistance from your adult partners, turn the Chair to the other side as shown in pix Attach mortise of Right Leg Panel With Pre-installed Levelllers (A) to tenon of the Seat Panel (C) Secure by using Screw (①) with Allen Key(③). Do not fully tighten the Screws.
D A B Step 4.2 Step 4.1 3 2 1 With assistance from your adult partners, turn the Chair right side up 4.1) Attach Backrest Panel (D) to Right Leg Panel With Pre-installed Levelllers (A) by using Bolts (②) with Allen Key(③) 4.2) Attach Backrest Panel (D) to Left Leg Panel With Pre-installed Levelllers (B) by using Screws (①) with Allen Key(③). Do not fully tighten the Bolts and Screws.
Adjust height for balance Adjust low for balance Adjust Pre-installed Levelllers height for balance Inspect the Chair and make sure all parts are adequately connected.
Place Seat Cushion(F) and Backrest Cushion (E) on to the Chair using the velcro straps as shown above. Your Chair is ready for use. This Chair can only be used on a flat, level surface.
Do not put hot items directly on furniture surface Do not clean furniture with harsh cleansers or polish. To obtain the longest lifespan of your outdoor prodcts, minimizing exposure to direct sunlight is recommended. Children should not climb or jump on the furniture. Do not write on furniture without a padded barrier to protect the surface. To obtain the longest lifespan of your outdoor products, avoid extended and lengthy exposure to rain, snow, and direct sunshine.
Caution : You must read this before you proceed CHAIR CAUTION : This Chair is NOT a TOY. Keep your child / children at bay in the process of assembly. For turning the Chair and to prevent damage to the Chair, 02 persons may be needed to execute this action.
A Left Leg Panel With Pre-installed Levelllers 1 B Right Leg Panel With Pre-installed Levelllers 1 C Seat Panel 1 D Backrest Panel 1 E Backrest Cushion 1 F Seat Cushion 1
Label Picture Description QTY ① Screw (M7*70mm) 7 ② Bolt (M6*35mm) 3 ③ Allen Key 1 Before Beginning Assembly:
Overview Backrest Cushion (E) Backrest Panel (D) Seat Cushion (F) Right Leg Panel With Pre-installed Levelllers(B) Left Leg Panel With Preinstalled Levelllers (A) Seat Panel (C) FRONT FACING This Chair has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the Chair parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly.
Unpack and place all parts on a clean, non-marring surface.
Attach mortise of Right Leg Panel With Pre-installed Levelllers (B) to tenon of the Seat Panel (C) Secure by using Screw (①) with Allen Key(③). Do not fully tighten the Screws. Step 3 1 A C With assistance from your adult partners, turn the Chair to the other side as shown in pix above. Attach mortise of Left Leg Panel With Pre-installed Levelllers (A) to tenon of the Seat Panel (C) Secure by using Screw (①) with Allen Key(③). Do not fully tighten the Screws.
A D B 2 Step 4.2 1 Step 4.1 2 With assistance from your adult partners, turn the Chair right side up 4.1) Attach Backrest Panel (D) to Left Leg Panel With Pre-installed Levelllers (A) by using Bolts (②) with Allen Key(③) 4.2) Attach Backrest Panel (D) to Right Leg Panel With Pre-installed Levelllers (B) by using Screws (①) with Allen Key(③). Do not fully tighten the Bolts and Screws.
Adjust height for balance Adjust low for balance Adjust Pre-installed Levelllers height for balance Inspect the Chair and make sure all parts are adequately connected.
Place Seat Cushion(F) and Backrest Cushion (E) on to the Chair using the velcro straps as shown above. Your Chair is ready for use. This Chair can only be used on a flat, level surface.
Do not put hot items directly on furniture surface Do not clean furniture with harsh cleansers or polish. To obtain the longest lifespan of your outdoor prodcts, minimizing exposure to direct sunlight is recommended. Children should not climb or jump on the furniture. Do not write on furniture without a padded barrier to protect the surface. To obtain the longest lifespan of your outdoor products, avoid extended and lengthy exposure to rain, snow, and direct sunshine.
A Left Leg Panel With Pre-installed Levelller 1 B Right Leg Panel With Pre-installed Levelller 1 C Seat Panel 1 D Backrest Panel 1 E Seat Support Bar 1
F Leg Support Bar 1 G Backrest Cushion 2 H Seat Cushion 1 Label Picture Description QTY ① Short Screw (M7*70mm) 7 ② Long Screw (M7*120mm) 3 ③ Allen Key 1 Before Beginning Assembly:
Overview Left Leg Panel With Pre-installed Levelller (A) Backrest Panel (D) Backrest Cushion (G) Seat Panel (C) Seat Cushion (H) Seat Support Bar (E) Left Leg Panel Leg Support Bar (F) With Pre-installed Levelller (B) FRONT FACING This Chair has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the Chair parts, the above picture is to help you put the various parts into perspective.
Unpack and place all parts on a clean, non-marring surface. Step 2 D 3 A Attach Backrest Panel (D) to Left Leg Panel With Pre-installed Levelller (A), secure by using Screw (②) with Allen Key(③). Do not fully tighten the Screws.
C A With assistance from your adult partners, lay down the Chair Attach mortise of Seat Panel (C) to tenon of the Left Leg Panel With Pre-installed Levelller (A) Step 4 B C Attach mortise of Right Leg Panel With Pre-installed Levelller (B) to tenon of the Seat Panel (C) Secure by using Screw (①) with Allen Key(③).
Step 5 B F E A Insert Seat Support Bar (E) and Leg Support Bar (F) to Left Leg Panel With Pre-installed Levelller (A) and Right Leg Panel With Preinstalled Levelller (B) Secure Right Leg Panel With Pre-installed Levelller (B) to Seat Support Bar (E) and Leg Support Bar (F) by using Screws (①) and Allen Key (③) Do not fully tighten the Screws.
3 E F A With assistance from your adult partners, turn the Chair right side up Secure Seat Support Bar (E) and Leg Support Bar (F) to Left Leg Panel With Pre-installed Levelller (A) by using Screws (①) and Allen Key (③) Do not fully tighten the Screws.
Inspect the Chair and make sure all parts are adequately connected. In a sequential manner, tighten all Bolts and Screws at all joints With assistance from your adult partners, adjust the Levellers to desired height to avoid wobbles Step 8 G H Place Seat Cushion(G) and Backrest Cushions (H) on to the Chair using the velcro straps as shown above. Your Chair is ready for use. This Chair can only be used on a flat, level surface.
Note: This is optional step in case we want to connect all chairs in a set together and should be done before placing cushion With assistance from your adult partners, up side down the chairs and using pre-fixed clip ti connect the chairs together
Do not put hot items directly on furniture surface Do not clean furniture with harsh cleansers or polish. To obtain the longest lifespan of your outdoor prodcts, minimizing exposure to direct sunlight is recommended. Children should not climb or jump on the furniture. Do not write on furniture without a padded barrier to protect the surface. To obtain the longest lifespan of your outdoor products, avoid extended and lengthy exposure to rain, snow, and direct sunshine.
