Use and Care Manual

Label Picture Description QTY

S Wooden Seat Bar 14

T Wooden End Bar 2

E Side Supporting Bar 2

Q Armrest 2

Frame (Found in

Separate Carton)

Wooden Swing Chair

CAUTION : Do Not Swing on or in chair. This could cause the product to

tip over resulting in possible injury.

This Swing Chair is NOT a TOY.

Keep your child / children at bay during the assembly process.

Have at least two to four adults on hand to help with assembling this

swing chair.

Caution: You must read this before you proceed

1 OF 5

PAGE 1
Caution: You must read this before you proceed Wooden Swing Chair CAUTION : Do Not Swing on or in chair. This could cause the product to tip over resulting in possible injury. This Swing Chair is NOT a TOY. Keep your child / children at bay during the assembly process. Have at least two to four adults on hand to help with assembling this swing chair.
PAGE 2
Label Picture Description QTY A Long Chain 2 B Short Chain 2 C Eye Bolt(M10X60MM) 4 J Carabiner 6 L Bolt(M8X100MM) 4 M Bolt Cap 4 K Bolt(M8X50MM) 29 G Nut 5 H Washer 5 W Socket Wrench 1 Y Allen Key 2 Y1 Bigger Allen Key 2 Before Beginning Assembly: 2 OF 5
PAGE 3
Step 1 Attach Wooden Seat Bar(S) to the Side Supporting Bar(E) with Bolt(H) using Allen Key(Y). Repeat this process with the remaining thirteen Wooden Seat Bars(S). Do not over tighten the Bolts. Step 2 Attach the two Wooden End Bars(T) to the both ends of Seat using Eye Bolts(C), Washer(H) and Nut(G) with Socket Wrench(W). Do not over tighten the Bolts.
PAGE 4
Step 3 Attach the two Armrests(Q) to the Side Supporting Bar(E) using Bolt(L) and Bolt Cap(M) using Bigger Allen Keys(Y1). Now, FULLY tighten all Bolts at all joints. Step 4 Connect Long Chain(A) to the Eye Bolt(C) at the bottom end of the chair with Carabiner(J). Connect Short Chain(B) to the Eye Bolt(C) at the top end of the chair with Carabiner(J). Connect the top ends of the Chains(A,B) together with Carabiner(J). Step 5 Connect Carabiner(J) on Chain(A,B) to the Eye Bolt on Frame(G).
PAGE 5
OF 5