Use and Care Manual

ManualsBrandsNoble House ManualsOutdoorsGray Wood Outdoor Rocking Chair with Gray Cushion

Rocking Chair

CAUTION : This Chair is NOT a TOY. Keep your child / children at bay in the

process of assembly.

For turning / flipping the chair and to prevent damage to the chair, 02 persons

may be needed to execute this action.

CAUTION: You must read this before you proceed.

1 of 6

Summary of content (6 pages)

PAGE 1
Rocking Chair CAUTION: You must read this before you proceed. CAUTION : This Chair is NOT a TOY. Keep your child / children at bay in the process of assembly. For turning / flipping the chair and to prevent damage to the chair, 02 persons may be needed to execute this action.
PAGE 2
No. Description Qty A Left Leg 1 B Right Leg 1 C Backrest 1 D Seat Panel 1 E Seat Cushion 1 Description Qty Long Screw M6x80 3 Short Screw M6x50 3 Short Bolts M6x65 3 Long Bolts M6x80 3 Sleeve Nut M6x15 3 Allen Key 2 No. Picture Picture       Before Beginning Assembly: Read instructions, cover to cover. Have 2 adults on hand for assembly. Do not assemble on flooring or carpet. Assemble on a clean non-marring surface (packing foam). Save all packaging until finished.
PAGE 3
OVERVIEW This Rocking Chair has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the Rocking Chair parts, the above picture is to help you put the various parts into perspective. Please read through the instructions herebelow to familiarise the parts and steps before assembly.
PAGE 4
Step 1 Attach the Backrest (C) into the housing on the Seat panel (D), then affix them by using Short screws () and Allen key ( ) as shown is picture. CAUTION : DO NOT FULLY TIGHTEN THE SCREWS. Step 2 2.2 2.1 2.3 Step 2.1: Attach the Left leg (A) to the assembled frame as shown in picture. Then affix the Left leg (A) with the Backrest (C) by using Long bolts ( ), Slevee nut () and Allen Key ( ). Step 2.
PAGE 5
Step 3 With the help from your partner, turn the chair to rest on Left leg (A). Repeat same process as Step 2 to attach Right leg (B) into assembled frame as shown in picture. CAUTION : DO NOT FULLY TIGHTEN THE BOLTS/SCREWS Step 4 Turn the chair right way up. NOW, go back to all screws and bolts previously loosely fasten, drive in and tighten all screws and bolts in sequential manner. This sequential manner will reduce possible distortion of frame.
PAGE 6
of 6