Caution : You must read this before you proceed CHAIR Label Picture Description QTY A Seat 1 B Right Leg 1 C Left Leg 1 D Seat Cushion 1 Noble House Home Furnishings LLC Page 1 OF 5
Label Picture Description QTY ① Bolt (M6*30MM) 5 ② Bolt (M6*15MM) 5 ③ Washer 9 ④ Allen Key 1 Before Beginning Assembly: Noble House Home Furnishings LLC Page 2 OF 5
Overview This Chair has multiple parts and may require up to 15 minutes to assemble. To give you an overview of the Chair parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly. Step 1 Open the carton and place all the parts onto a clean, non-marring surface. Attach the Right Leg(B) to Seat(A) using Bolts(①) and Washers(③) with Allen Key(④) as shown above.
Step 2 Attach the Left Leg(C) to Seat(A) using Bolts(①) and Washers(③) with Allen Key(④) as shown above. Attach the Left Leg(C) to Seat(A) using Bolts(②) and Washers(③) with Allen Key(④) as pictured. Tighten all Bolts at all joints in a sequential manner. Occasionally some of the PE Wicker shifts and covers the mounting positions preventing easy assembly. The PE Wicker should never be cut, but moved away from the mounting positions. Step 3 Put the Seat Cushion(D) on the Chair.
Do not put hot items directly on furniture surface Do not clean furniture with harsh cleansers or polish. To obtain the longest lifespan of your outdoor prodcts, minimizing exposure to direct sunlight is recommended. Children should not climb or jump on the furniture. Do not write on furniture without a padded barrier to protect the surface. To obtain the longest lifespan of your outdoor products, avoid extended and lengthy exposure to rain, snow, and direct sunshine.
