Installation Guide

Step 2
Step 3
Attach Column(C) between Side Panels(A) using Bolts(⑤), Washers(⑨), and Nuts(⑦)
with Spanners(⑩).
Repeat this process with the remaining Side Panels(A) and Columns(C).
Tighten the Bolts and Nuts fully in a sequential manner.
Then cover the Bolts and Nuts with Bolt Caps(⑥) and Nut Caps(⑧).
Attach Side Panels(A) using Bolts(①), Washers(⑨), and Nuts(⑦) with Spanners(⑩).
Repeat this process with the remaining Side Panels(A) until all Side Panels are
connected.
Tighten the Bolts and Nuts fully in a sequential manner.
Then cover the Bolts and Nuts with Bolt Caps(⑥) and Nut Caps(⑧).
Noble House Home Furnishings LLC
Page 6 OF 11