Installation Guide

Step 4
Step 5
Attach Side Panel Top Connector(G) and Side Panel Bottom Connector(H) to Side
Panels(A) using Bolts(②), Washers(⑨), and Nuts(⑦) with Spanners(⑩).
Repeat this process with all Side Panel Top Connectors(G) and Side Panel Bottom
Connectors(H) and Side Panels(A).
Note: Please use a ladder, if you can't reach it.
Tighten the Bolts and Nuts fully in a sequential manner.
Then cover the Bolts and Nuts with Bolt Caps(⑥) and Nut Caps(⑧).
Connect Corner Brace(M) between Column(C) and Side Panel(A) using Bolt( ①) and
Washer(⑨) with Spanner(⑩).
Repeat this process until all Corner Braces(M), Columns(C) and Side Panels(A) are
connected.
Note: Please use a ladder, if you can't reach it.
Tighten the Bolts fully in a sequential manner.
Then cover the Bolts with Bolt Caps(⑥).
Noble House Home Furnishings LLC
Page 7 OF 11