Use and Care Manual

Note: Please place a blanket or carton on the floor before assembly to protect
surfaces from cuts and abrasions.
3.1) Attach column inside: Left Short Beam(B), Right Short Beam(C) and Columns(A)
using Bolts(⑤) and Washers(⑨) with Allen Key(⑦).Repeat once and then set aside.
3.2) Attach the two items from the previous step to another Left Short Beam(B), and Right
Short Beam(C) using Bolts(⑤) and Washers(⑨) with Allen Key(⑦).
Repeat again with the remaining side.
3.3) Attach outside: Left Short Beam(B) and Right Short Beam(C) to Column(A) through
welded bracket on Beams using Bolts(③) with Allen Key(⑦).
Note: Please use a ladder, if you can't reach it.
Repeat this process with the remaining Left Short Beams, Right Short Beams and
Columns.
Ti
g
hten the Bolts full
y
in a se
q
uential manner.
Step 3
B
C
C
C
C
B
B
B
3.3
3.1
3.2
⑤+⑨
C
A
Outside
③
③
CB
⑤+⑨
A
B
Inside
B
C
C
C
B
B
B
C
A
A
Noble House Home Furnishings LLC Page 7 OF 15