Use and Care Manual

ManualsBrandsNoble House ManualsOutdoor Lounge ChairsNaturally Stained Farmhouse-Style Wood Outdoor Lounge Chairs with Cream Cushion (2-Pack)

Page 1 of 7

Caution : You must read this before you proceed

ARMCHAIR

CAUTION : This Chair is NOT a TOY.

Keep your child / children at bay during the process of assembly.

When lifting or moving the Chair and to prevent damage to the Chair, two

adults should perform these actions.

Noble House Home Furnishings LLC

Summary of content (7 pages)

PAGE 1
Caution : You must read this before you proceed ARMCHAIR CAUTION : This Chair is NOT a TOY. Keep your child / children at bay during the process of assembly. When lifting or moving the Chair and to prevent damage to the Chair, two adults should perform these actions.
PAGE 2
Label Picture Description QTY A Seat Panel 1 B1 Right Leg Panel (Labelled B1) 1 B2 Left Leg Panel (Labelled B2) 1 C Back Panel 1 D Front Panel 1 E Backrest Panel 1 F Bottom Panel 1 G Backrest Cushion 1 H Seat Cushion 1 Noble House Home Furnishings LLC Page 2 of 7
PAGE 3
Label Picture Description QTY 1 Short Bolt (M6x20mm) 9 2 Sleeve Nut (M6x13mm) 13 3 Allen Key 2 4 Screw (M4x30mm) 3 5 Screwdriver 6 Long Bolt (M6x45mm) Not provided 5 Before Beginning Assembly: Noble House Home Furnishings LLC Page 3 of 7
PAGE 4
OVERVIEW Backrest Cushion (G) Right Leg Panel (B1) Backrest Panel (E) Seat Cushion (H) Seat Panel (A) Front Panel (D) Left Leg Panel (B2) FRONT FACING This Chair has multiple parts and may require up to some 30 minutes to assemble. To give you an overview of the Chair parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly.
PAGE 5
seat A Step 2 4 B1 5 C Wooden dowel Insert the wooden dowel on Back Panel(C) into mounting position on Right Leg Panel(B1). Affix Back Panel(C) with Right Leg Panel(B1) using Screw(④), with Screwdriver (⑤) Only loosely tighten the Screws. Step 3 B 2 3 3 6 D 3 2 3 6 Attach Front Panel(D) to Right Leg Panel(B1) using Long Bolt() and Sleeve Nut(②) with Allen Keys(③) Only loosely tighten the Bolts. Repeat the same process of Step 2 and 3 with the other Left Leg Panel(B2).
PAGE 6
Step 4 2 B E 1 B 3 2 1 3 Then, attach Backrest Panel(E) to Right Leg Panel(B1) and Left Leg Panel(B2) using Short Bolt(①) and Sleeve Nut(②) with Allen Keys(③) Only loosely tighten the Bolts. Step 5 Step 5.2 Step 5.1 F A 5.1: Position Bottom Panel(F) into inside of the Loveseat. This can make the Chair have storage function 5.2: Position Seat Panel(A) onto the Loveseat.
PAGE 7
OUTDOOR Noble House Home Furnishings LLC Page 7 of 7