Instructions / Assembly

Overview
This Loveseat has multiple parts and may require up to some 30 minutes to assemble. To give you an overview of
the Loveseat parts, the above picture is to help you put the various parts into perspective. Please read through the
instructions here below to familiarise yourself with the parts and steps before assembly.
Step 1
Open the carton and place all the parts onto a clean and soft surface.
Unpack all packages of hardware.
Place the Right Armrest(B) with its inner side, facing skywards .
Put the Backrest(G) against the Left Armrest(G),make the metal rod on the Backrest(G) insert into the
MOUNTING POSITIONs of Left Armrest(B) as picture 1 shows.
Attach Backrest(G) and Right Armrest(B) together with hardware as picture 2 shows.
Use an Allen Key(⑤) to partially tighten these.
Do not Fully Tighten at this stage.
There may be some PE wicker that may have covered the bolt points. To ease assembly, guide and slide
the PE wicker away from the mounting positions. DO NOT CUT AWAY any PE WICKER as this would
cause the wicker to unravel !
Noble house Home Furnishings LLC
Page 3 OF 6