Assembly Instructions Caution : You must read this before you proceed. PATIO BENCH CAUTION : This bench is NOT a TOY. Keep your child / children at bay in the process of assembly.
No. Picture Description Qty Backrest Panel 1 Chair Seat Panel 1 Hind legs 2 Front legs 2 Right arm 1 Left arm 1 Description Qty G Bolts(M6*15mm） 3 J Studs (M8*35mm) 5 M Studs (M8*30mm) 9 Washers ( 8mm ) 14 Springs Washers ( 8mm) 14 Nuts ( 8mm ) 14 Bolts (M6*25mm ) 5 Washers ( 6mm ) 5 Spring Washers ( 6mm ) 5 Nuts ( 6mm ) 5 K Spanner 1 L Screwdriver 1 A B C D E F No.
Before Beginning Assembly: Step 1 Place all parts on a clean soft surface. Step 2 Attach the Studs (J)((M8*35mm) to the contact points on the Chair Seat Panel (B) using the Screwdriver (L). Then attach the Backrest Panel (A) to the the Chair Seat Panel (B) using Washers, Spring Washers and Nuts (8mm)(H). Tighten the Nuts using the Spanner (K). DO NOT over tighten at this stage.
Step 3 Attach the Studs(M)(M8*30mm) to the contact points on Chair Seat Panel (B)using the Screwdriver (L) . Then attach the Hind legs (C) and Front legs (D) onto the Chair Seat (B) using the Washers, Spring washers and Nuts(8mm) (H). Tighten the Nuts using the Spanner (K). DO NOT over tighten at this stage. Repeat this procedure for the remaining Legs . Step 4 Connect the Right arm(E) and Left arm (F) to the Seat Panel (B) using Bolts, Washers, Spring washers and Nuts (6mm)(I).
OF 5
