Instructions / Assembly

ManualsBrandsNoble House ManualsChairsStratton Brown Bonded Leather Recliner

User Instructions

Reclinin

Chai

Please read the Instruction Manual below carefully before use.

This is a Reclining Chair. At anytime in a reclined seat position or in the upright position, you may enjoy a rocking motion by using your body

weight in a back-front rocking motion.

Supervise children when they are using this Recliner.

To get into a reclined posture - Recline backrest

Sit squarely in the seat.

Place your feet apart .

Place your left and right arm onto the armrest.

Synchronize a backward push with your arms and back.

Use your body weight and push backwards into the seat into you achieve a fully reclined position.

To get out of chair - move Seatback into Upright Position

Tilt your body weight slightly forward and upwards.

The seat back will come up to an upright position.

Where necessary, use either of your arms to help lift and push yourself out of the seat.

Summary of content (6 pages)

PAGE 1
User Instructions Reclining Chair Please read the Instruction Manual below carefully before use. This is a Reclining Chair. At anytime in a reclined seat position or in the upright position, you may enjoy a rocking motion by using your body weight in a back-front rocking motion. Supervise children when they are using this Recliner. To get into a reclined posture - Recline backrest Sit squarely in the seat. Place your feet apart . Place your left and right arm onto the armrest.
PAGE 2
Caution :You must read this before you proceed Reclining Chair 1 of 5
PAGE 3
Label Picture Description QTY A Chair Base 1 B Chair Backrest 1 C Wooden Leg 4 D Washer Ring 7 Before Beginning Assembly: 2 of 5
PAGE 4
Step 1 Unpack the Chair as shown. Open the inner box and take out the four Wooden Legs(C) provided. Caution: The Chair parts are large and heavy, always have a second adult to assist you when moving and lifting them. Step 2 Turn the Chair Base(A) on its side on a clean, non-marring surface. Install the first Wooden Leg(C) into the bottom of the Chair Base(A) by placing one Washer Ring(D) onto the threaded stem.
PAGE 5
Step 3 Stand the Chair Base(A) rightside up. Stand behind the Chair Base(A) while holding up the Chair Backrest(B). Tilt the Chair Backrest(B) slightly forward, then insert the small metal arms on the sides of the Chair Backrest into the prefabricated slide lock gadget on the Chair Base as shown above. Firmly but gently, push the Chair Backrest(B) downwards until the Backrest is fully slotted and locked into position. Step 4 Smooth down the fabric flap on the Chair Backrest(B).
PAGE 6
5 of 5