Instructions / Assembly

ManualsBrandsNoble House ManualsOutdoor Bistro TablesCarina Gray Round Wood Outdoor Bistro Table

1

2

3

4

5

Page 1 of 6

TABLE

CAUTION: You must read this before you proceed.

First Leg Panel (B)

Second Leg Panel (C)

If wobble

Test again

30cm-50cm

A

B

2

1

C

1

1

2

2

Step 3.1

Step 3.3

Step 3.2

C

B

A

CAUTION

: This Table is NOT a TOY.

Keep your child / children at bay during the assembly process.

For moving the Table and to prevent damage to the Table, two adults may

be needed to execute this action.

First Leg Panel (B)

Second Leg Panel (C)

If wobble

Test again

30cm-50cm

A

B

2

1

C

1

1

2

2

Step 3.1

Step 3.3

Step 3.2

C

B

A

Noble House Home Furnishings LLC

Summary of content (6 pages)

PAGE 1
TABLE CAUTION: You must read this before you proceed. CAUTION : This Table is NOT a TOY. Keep your child / children at bay during the assembly process. For moving the Table and to prevent damage to the Table, two adults may be needed to execute this action.
PAGE 2
No. Picture Description Qty A Table Top 1 B First Leg Panel (Labelled B) 1 C Second Leg Panel (Labelled C) 1 No. Picture Description Qty Screws (M6x45mm) 9 Allen Key 1 Before Beginning Assembly: Read instructions, cover to cover. Have 2 adults on hand for assembly. Do not assemble on flooring or carpet. Assemble on a clean non-marring surface (packing foam). Save all packaging until finished.
PAGE 3
OVERVIEW First Leg Panel (B) Second Leg Panel (C) This Table has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the Table parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly. Step 1 Unpack and place all parts on a clean, non-marring surface.
PAGE 4
Step 2 B 2 1 A Place the Table Top(A) facedown on a clean, non-marring surface. Position the First Leg Panel(B) onto the Table Top(A). Insert three Screws(①) through the mounting positions of the First Leg Panel(B) and affix using the Allen Key(②). Only loosely tighten the Screws. Step 3 2 1 Step 3.3 C C Step 3.1 2 B 1 A Step 3.2 3.1) Position seperated point of the Second Leg Panel(C) over the First Leg Panel(B) onto the Table Top(A). 3.
PAGE 5
Step 4 If wobble Test again 30cm-50cm Place the Table right side up on a LEVEL SURFACE to see if it wobbles. If it wobbles, lift the Table to some 30cm to 50cm height from the ground. Keep your feet and toes well away from the drop zone. Drop the Table freely and vertically with the four legs, hitting the ground, at the same time. This Drop Test will help to ensure that all the Screws and gaps all reach full alignment status. Test again for evenness on a LEVEL SURFACE.
PAGE 6
OUTDOOR Noble House Home Furnishings LLC Page 6 of 6