Caution : You must read this before you proceed Barstool Picture Label Picture Description QTY A Seat 1 B Leg Frame 1
Label Picture Description QTY ① Washer 5 ② Bolt (M6*40mm) 5 ③ Alley Key 1 Before Beginning Assembly: Overview Seat (A) Leg Frame (B) This Barstool has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the Barstool parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly.
Step 1 Open the carton, and place all parts onto a clean, non-marring surface. Place the Seat(A) facedown. Step 2 Turn over the Leg Frame(B), and place it onto the Seat(A). Align the mounting positions of Leg Frame(B) and Seat(A). Attach the Leg Frame(B) to Seat(A) using Washer(①) and Bolts(②) with Allen Key(③). Tighten Bolts fully in a sequential manner after all Bolts are in place. Step 3 Stand the Barstool upright. Your Barstool is ready for use.
What is Proposition 65? Proposition 65 is a California law that requires warning labels on products that may contain one of more than 800-plus chemicals or ingredients that the California Office of Environmental Health Hazard Assessment (OEHHA) has deemed to cause cancer or other reproductive toxicity.