Use and Care Manual

Open the carton, and place all parts onto a clean, non-marring surface.
Place the Seat(A) facedown.
Turn over the Leg Frame(B), and place it onto the Seat(A).
Align the mounting positions of Leg Frame(B) and Seat(A).
Attach the Leg Frame(B) to Seat(A) using Washer(①) and Bolts(②) with Allen
Key(③).
Tighten Bolts fully in a sequential manner after all Bolts are in place.
Stand the Barstool upright.
Your Barstool is ready for use.
The Barstool can be only used on a flat, level surface.
Step 1
Step 2
Step 3