Instructions / Assembly

Step 4
Step 5
Attach Footrest(E) between Right Leg(B) and Left Leg(A) using Bolts() with Allen Key() as
shown above.
Do not fully tighten the Bolts.
Stand the Barstool up and check for stability.
Then proceed to tighten all Bolts at all joints.
Note: DO NOT fully tighten any Bolt in one go and then move on to the next. Rather, in
a sequential manner, gradually tighten each Bolt until all Bolts are evenly secured. This
methodology will ensure maximum evenness once all Bolts are fully tightened.
Your Barstool is ready for use.
This Barstool can only be used on a flat and level surface.
Noble house Home Furnishings LLC
Page 4 OF 5