Instructions / Assembly
Step 1
Step 2
Open the carton and place all the parts onto a clean, non-marring surface.
Place the Leg(B) with its inside facing up. Insert Top Side Bars(C) into Leg(B).
1.1) Attach the Top Side Bar(C) to Leg(B) using Bolts(②) with Allen Key(③) as shown above.
1.2) Attach the Top Side Bar(C) to Leg(B) using Bolts(①) with Allen Key(④) as shown above.
Do not fully tighten the Bolts.
Insert Footrests(D) into Leg(B).
2.1) Attach the Footrest(D) to Leg(B) using Bolts(②) with Allen Key(③) as shown above.
2.2) Attach the Footrest(D) to Leg(B) using Bolts(①) with Allen Key(④) as shown above.
Do not fully tighten the Bolts.
B
C
B
C
D
B
Step 1.1
Step 1.2
Step 2.1
B
D
Step 2.2
Page 3 OF 5