Instructions / Assembly

Step 1
Open the carton and place all the parts onto a clean and soft surface.
Unpack all packages of hardware.
Place the Backrest (A) with its inside facing skywards.
Attach Seat(B) to Backrest(A) using Hardware( 3 ) with Allen Key( ) as shown in
Picture 1 and Picture 2.
ATTENTION: Occasionally some of the PE Wicker shifts and covers the mounting
positions preventing easy assembly.
The PE wicker should never be cut, but moved away from the mounting positions.
Do not fully tighten the bolts.
Step 2
Place the Left Armrest / Leg(D), as picture above so as to be attached to the Left Armrest /
Leg(D) and Seat(B) using Hardware ( ) with Allen Key( ) as shown in Picture3.
Do not fully tighten the bolts.
Page 3 OF 6
2
4
2
4 6
4
3
6
3
4
3
4
D
6
6
6