Instructions / Assembly

ManualsBrandsNoble House ManualsOutdoor Coffee TablesCarlisle Sandblast Finish Wood and Rustic Iron Rectangular Outdoor Coffee Table

Page 1 of 7

CAUTION : You must read this before you proceed

TABLE

CAUTION:

This Table is NOT a TOY

Keep your child/ children at bay during the assembly process.

For moving the Table and to prevent damage to the Table, two adults are

needed to execute this action.

Noble House Home Furnishings LLC

Summary of content (7 pages)

PAGE 1
CAUTION : You must read this before you proceed TABLE CAUTION: This Table is NOT a TOY Keep your child/ children at bay during the assembly process. For moving the Table and to prevent damage to the Table, two adults are needed to execute this action.
PAGE 2
Label Picture Description Table Top （with folding legs） A B QTY 1 Support Bar 1 Description QTY ① Big Bolt (M8x20mm) 9 ② Small Bolt (M6x20mm) 5 ③ Big Washer (M8.5×20x2mm) 9 ④ Small Washer (M6.
PAGE 3
Before Beginning Assembly: Noble House Home Furnishings LLC Page 3 of 7
PAGE 4
Table Top (A) Support Bar (B) FRONT FACING This Table has multiple parts and may require up to some 15 minutes to assemble. To give you an overview of the Table parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly. Step 1 Unpack and place all parts on a clean non -marring surface.
PAGE 5
Step 2 5 1 1 3 A 3 Place the Table (A) facedown, on to a clean, soft surface to avoid any Scratches or clamages to the product Lift legs upwards and outwards until the braces are met at position to the table ,as shown in the above picture Secure Legs to Table by using Big Bolts (①) and Big Washers (③) with Allen Key (⑤), Total 8 posittions. DO NOT FULLY TIGHTEN THE BOLTS. Step 3 5 B 2 2 4 4 A Attach the Support Bar (B) to the Legs as shown in picture above.
PAGE 6
Step 4 Turn the Table right side up. Place the Table on a LEVEL SURFACE. Inspect it and make sure all parts are adequately connected. Gently and gracefully, place a force onto the table top. This would help to align all the parts at all the joint areas. Then proceed to tighten all bolts sequentially. DO NOT tighten any screw fully and then towards the next one. This would cause the frame to warp. If there is still wobbles, loosen the screws and execute this same process.
PAGE 7
Noble House Home Furnishings LLC Page 7 of 7