Instructions / Assembly

Step 7
Step 5
Your Table is ready for use.
This Table can only be used on a flat, level surface.
Adjust the Pre-installed Levellers at the base of the Legs until the Table is level to the ground.
Step 6
Attach the Leg support (C) to Table Legs(B) using Bolts(④), Washer(⑤),Spring
washers(⑥) with Spanner(⑦).
Then proceed to tighen all Bolts at all joints in a sequential manner.
A
C
④
⑥
⑤
⑦
Adjust height
for balance
Adjust low for balance
Noble House Home Furnishings LLC Page 5 OF 6