Use and Care Manual

ManualsBrandsNoble House ManualsOutdoor DaybedsGray Wood Outdoor Daybed with Light Gray Cushions

DAYBED

CAUTION : This Daybed is NOT a TOY.

Keep your child / children at bay in the process of assembly.

For turning the Daybed and to prevent damage to the Daybed, 02 persons may

be needed to execute this action

CAUTION: You must read this before you proceed

Noble House Home Furnishings LLC 1

Summary of content (7 pages)

PAGE 1
DAYBED CAUTION: You must read this before you proceed CAUTION : This Daybed is NOT a TOY. Keep your child / children at bay in the process of assembly.
PAGE 2
No. Description Qty A Backrest Panel 1 B Seat Panel with Prefixed folding Leg 1 C Seat Cushion 1 D Back Pillow 4 Description Qty No.
PAGE 3
Before Beginning Assembly: OVERVIEW Back Pillow (D) Backrest Panel (A) Seat Panel with Pre-fixed folding Leg (B) Seat Cushion (C) FRONT VIEW This Day Bed has multiple parts and may require up to some 30 minutes to assemble. To give you an overview of the Day Bed , the above picture to assemble to help you put the various parts into perspective. Please read through the instructions here below to familiarise the parts and steps before assembly.
PAGE 4
Step 1 Unpack and place all parts on a clean, non-marring surface. Step 2 2.1) Open Folding Leg Panels prefixed under Seat (B) as shown in picture above. 2.2) Attach Backrest Panel (A) to Seat Panel (B) by using 2 Screws (③) + 6 Bolts (②) + Allen Key (①) as designated points as picture above. Do not fully tighten the Bolts and Screws This Daybed has multiple functions. Belows are some steps to help you how to use this chair for your purpose.This Daybed can only be used on a flat, level surface.
PAGE 5
Function 1: A Bed To use this Daybed as a bed, follow these instructions: 3.1) Retract Extend Armrest under the Seat Panel (B) to maximum level, then raise the Amrest slightly. Next, pull the Buttons to open the Support Leg Panels as shown on the picture. Finally, pulling Extend Armrest until its Side Rail flush with slats of Seat Panel (B). 3.2) Place Seat Cushion (C) and Back Pillows (D) onto the Daybed.
PAGE 6
Function 2: A Sunlounger Step 4.2 Step 4.1 connection rail round latch This Daybed can be also used as a Sunlounger with Adjustable Armrest. Pull the armrest, close Leg Panels and lock the Button. 4.1) Raise 1 Amrest halfway to gain the first level of the Armrest. At this level, the grave hole in the armrest will match with round latch as picture shown. 4.2) Release the Armrest and raise this section to maximum height. The grave hole in the armrest will match with connection rail.
PAGE 7
Noble House Home Furnishings LLC 7