Caution : You must read this before you proceed This Loveseat is NOT a TOY. Keep your child / children at bay during the assembly process.
M Front Panel 1 N Seat Cushion 1 Description QTY 1 Bolt m6*35 11 2 Washer 16 3 Nut Cap 1 4 Allen Key 5 5 Bolt m6*30 5 Label Picture Before Beginning Assembly: Page 2 OF 6
Overview Loveseat Backrest(K) Left Armrest(B) Right Armrest(C) Sofa Seat(L) Seat Cushion(N) Front Panel(M) This Loveseat has multiple parts and may require up to some 30 minutes to assemble. To give you an overview of the Loveseat parts, the above picture is to help you put the various parts into perspective. Please read through the instructions herebelow to familiarise yourself with the parts and steps before assembly. Step 1 3 1 2 Open the carton and place all the parts onto a clean and soft surface.
Step 2 2 1 3 Place the Seat(L), as picture above so as to be attached to the Right Armrest(C) and Backrest(K) using hardware ( 1 . 2 ) with Allen key( 3 ) as shown in picture 2. Do not fully tighten at this stage. Step 3 2 1 3 3 5 2 Place the Front Panel(M) as pictured above and affix to Seat (L) and Right Armrest(C). Attach Front Panel(M) to Seat(L) using Hardware( 1 2 5 ) with Allen Key( 3 ) as shown in Picture 3 and Picture 4. Do not fully tighten the bolts at this stage.
Step 4 3 1 3 2 5 2 Place Left Armrest(B) against Backrest(K), Seat(L) and Front Panel(M). Attach the Left Armrest(B) to Backrest(K) using Hardware( 1 , 2 ) with Allen Key( 3 ) as shown in Picture 5. Attach Left Armrest(B) to Front Panel(M) using Hardware( 2 , 5 ) with Allen Key( 3 ) as shown in Picture 6. Do not fully tighten the bolts at this stage. Step 5 4 Fully tighten all bolts at all joints, then cover the four Backrest Bolts with Nut Cap ( 1 ).
Do not put hot items directly on furniture surface Do not clean furniture with harsh cleansers or polish. To obtain the longest lifespan of your outdoor prodcts, minimizing exposure to direct sunlight is recommended. Children should not climb or jump on the furniture. Do not write on furniture without a padded barrier to protect the surface. To obtain the longest lifespan of your outdoor products, avoid extended and lengthy exposure to rain, snow, and direct sunshine.