Caution : You must read this before you proceed Bird Bath Description QTY A Bird on Lotus 1 B Water Basin 1 C Pedestal 1 D Base 1 Label Picture Noble House Home Furnishings LLC Page 1 OF 5
Description QTY ① Bolt (M8*10MM) 4 ② Bolt (M6*15MM) 4 ③ Bolt (M8*25MM) 2 ④ Spanner 1 ⑤ Washers(6mm) 4 ⑥ Rubber Gasket 1 Label Picture Before Beginning Assembly: Noble House Home Furnishings LLC Page 2 OF 5
Overview Water Basin (B) Base (D) This Bird bath has multiple parts and may require up to 30 minutes or more to assemble. To give you an overview of the Bird bath, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly. Step 1 Unpack and place all parts on a clean, non-marring surface. Step 2 A ③ ⑥ ④ B Align the mounting positions on Bird on Lotus(A) and Water Basin(B).
Step 3 ① ① D ④ ① C Align the mounting positions on Pedestal (C) and Base (D), then using the Bolt(①) by Spanner(④). Fully tighten the Bolts. Step 4 B ⑤ ⑤ ⑤ ② ② ② C ④ Attach the Pedestal (C) to Water Basin (B) by using the Bolts(②)and Washers(⑤) with Spanner(④). Then proceed to tighen all Bolts at all joints in a sequential manner. Step 5 Your Bird bath is ready for use. This Bird bath can only be used on a flat, level surface.
Noble House Home Furnishings LLC Page 5 OF 5