Assembly Instructions Caution: You must read this before you proceed Office Chair Noble House Home Furnishings LLC Page 1 OF 6
Parts List Label Picture Description QTY A Chair Seat 1 B Mechanism 1 C Gaslift 1 D Chrome Base 1 E Caster 5 ① Bolt (M8*30mm) 5 ② Washer 5 ③ Spring Washer 5 ④ Allen Key 1 Hardware Assembly Preparation Before Beginning Assembly: Noble House Home Furnishings LLC Page 2 OF 6
Assembly Steps Chair Seat(A) Mechanism(B) Gaslift(C) Caster(E) Chromed Base(D) FRONT FACING This Office Chair has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the Office Chair parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly.
Step 1 E E E E E D Unpack and place all parts on a clean, non-marring surface. Place the Chrome Base(D) facedown as pictured. Insert the Casters(E) into the mounting position of Chrome Base(D) as shown above. Step 2 C D Insert the Gaslift(C) into the mounting position under of Chrome base(D) as pictured. Note: The Gaslift(C) will self-lock into place.
Attach Mechanism(B) to Chair Seat(A) using Bolts(①), Washers(②), and Spring Washers(③) with Allen Key(④). Fully tighten the Bolts in a sequential manner. Step 4 A D Turn the Chair Seat(A) up. Insert the Chair Seat(A) into Chrome Base(D) as pictured. Make sure all parts are connected and securely locked into position. You can use the Mechanism's(B) handle to rise or lower the Chair. Step 5 Your Office Chair is ready for use. This Office Chair can only be used on a flat, level surface.
Noble House Home Furnishings LLC Page 6 OF 6
