Instructions / Assembly

Page 7 of 8
Step 6
Place Seat Cushion(C) onto the seat of the Barstool and secure the velcro straps as shown
above.
Inspect the Barstool and make sure all parts are connected.
Your Barstool is ready for use.
This Barstool can only be used on a flat, level surface.
Stand the Barstool up, with assistance from your adult partner.
Exert pressure floorwards, onto the Barstool with both your hands.
This pressure will help the Legs and Barstool reach full alignment status.
Check for wobbles on a LEVEL surface.
If no wobbles are found proceed to tighten the Screws in a sequential manner,
until evenly secured.
When tightening the Screws tighten sequentially.
Do not tighten any Screw fully and then move on towards the next one.
If there are still wobbles, loosen the Screws and excute the same above
process.
Step 7
F
Noble House Home Furnishings LLC