Instructions / Assembly

Assembly Instructions

Caution: You must read this before you proceed

TABLE

Caution: This Table is NOT a TOY.

Keep your child / children at bay in the process of assembly.

Whenever moving or lifting the Table and to prevent damage to the Table, two adults

may be needed to execute these actions

Noble House Home Furnishings LLC Page 1 of 5

PAGE 1
Assembly Instructions Caution: You must read this before you proceed TABLE Caution: This Table is NOT a TOY. Keep your child / children at bay in the process of assembly.
PAGE 2
Parts List Label Picture Description QTY A Table Top 1 B Leg 4 Description QTY ① Bolt (M8x60mm) 9 ② Washer (M8xD2mm) 9 ③ Allen Key 1 Hardware Label Picture Assembly Preparation Before Beginning Assembly: Assembly Steps Noble House Home Furnishings LLC Page 2 of 5
PAGE 3
Overview Table Top (A) Leg (B) FRONT FACING This Table has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the Table parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly. Step 1 Unpack and place all parts on a clean, non-marring surface.
PAGE 4
Step 2 2.2 2.1 2.1) Place the Table Top(A) facedown as shown in picture above. 2.2) Attach the Leg(B) to Table Top(A) using Bolts(①), and Washers(②) with Allen Key(③) as pictured above. Repeat the same process the remaining three Legs(B). Do not fully tighten the Bolts. Step 3 Stand the Table up, with assistance from your adult partner. Exert pressure floorwards, onto the Table with both your hands. This pressure will help the Legs and Table Top reach full alignment status.
PAGE 5
Noble House Home Furnishings LLC Page 5 of 5