Instructions / Assembly

With assistance from your adult partners, turn the Table back to normal flat
ground
EXERT pressure, floorwards, onto the Table.
This pressure will help the Legs and Table Top reach alignment at all joints.
Check for wobbles.
In a sequential manner, gradually tighten all Bolts until evenly secured.
Inspect the Table and make sure all parts are adequately connected.
Your Table is ready for use.
This Table can only be used on a flat, level surface.
2.1) With assistance from your adult partners, turn the Table Top (A) up side
down as picture shown
2.2) Attach the Leg (B) to Table Top (A) by using Bolt (1) and Allen Key (3)
Repeat the same process with the other Legs (B)
DO NOT FULLY TIGHTHEN BOLTS.
Page 26 OF 27