Assembly Instructions Caution: You must read this before you proceed Barstool Part List Label Picture A Description QTY Chair Seat 1 Chair Leg B C 1 Cushion 1 Description QTY ① Nut 5 ② Spanner 1 Hardware Label Picture Noble House Home Furnishings LLC Page 1 OF 5
Assembly Preparation Before Beginning Assembly: Overview Chair Seat(A) Cushion(C) Chair Leg(B) Front Facing This Chair has multiple parts and may require up to 15 minutes to assemble. To give you an overview of the Chair, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly.
Step 1 A B Unpack and place all parts on a clean, non-marring surface. Step 2 B A Place the Chair Seat(A) facedown as(3.1) shown above. Step 3 B ② ① A Align the mounting positions on Chair Leg(B) and Chair Seat(A), then attach using Nuts(①) with Spanner(②). Note: Please ensure the labelled 'Front' of the Chair Leg is as pictured. Do not fully tighten the Nuts.
Step 4 Stand the Chair up. Carefully and gently sit into the Chair, this action will ensure there are no gaps between the parts. Then proceed to tighen all Nuts at all joints in a sequential manner. Step 5 C Then put the Cushion (C) on the chair seat. Your Chair is ready for use. This Chair can only be used on a flat, level surface.
Noble House Home Furnishings LLC Page 5 OF 5