Instructions / Assembly

Bulb Replacement Instructions
Fuse Replacement Instructions
Storage
Remove all holiday decorations. Gently press tips back into center Branch. Raise
all Branches to original upright position taking care not to place undue pressure
on the attached ends of the branches. When disassembling tree, a twisting
motion will help to separate the sections from each other. All tree parts can be
replaced in carton and should be stored in a cool, dry place.
1.Unplug light string from power source.
2.Pull up on the Bulb Lock unlatching the bulb from the bulb socket. Gently pull
the bulb straight out(Figure 4).
3.Before inserting the new bulb into socket, make sure that the two wires on
either side of the bulb base are straight up and flush with the base（diagram at
right).
4.Carefully insert new bulb into socket and push down Base Lock TM until it
snaps into place (Fighre 5).
1.Unplug light string from power source.
2.Fuses are located in light string plug. Slide the fuse access cover away from
cord side (in direction of arrow, Figure 6) exposing fuses.
3.Remove fuses from compartment and examine, Replace burnt out fuse with
new one.
4.Close fuse compartment by sliding access cover back in towards cord side of
plug (Figre 7).
Page 4 OF 5