Instructions / Assembly

ManualsBrandsNoble House ManualsArtificial Christmas Trees7.5 ft. Unlit Cashmere Pine and Mixed Spruce Artificial Christmas Tree with Snowy Branches and Pinecones

CAUTION : IMPORTANT SAFETY INSTRUCTIONS



The product is for indoor only

This seasonal use product is not intended for permanent installation or use.

When decorating trees, use miniature light bulb strings or LED light strings

only. "C" size bulbs are not recommended.

Do not mount or place near gas or electric heaters, fireplaces, candles or

other similar sources of heat.

Do not secure the wiring of the product with staples or nails, or place on sharp

hooks or nails.

Unplug the product when leaving the house, when retiring for the night, or if

left unattended.

CAUTION: This is an electrical product-not a toy! To advoid risk of fire, burns,

personal injury and electric shock, it should not be played with or placed where

small children can reach it.

Do not let lamps rest on the supply cord or any wire.

Do not use this product for other than its intended use.

Do not hang ornaments or other objects from cord,wire or light string.

Do not close doors or windows on the product or extension cords as this may

damage the wire insulation.

Never operate this product if the power cord or plug is damaged.

Use only manufacturer specified replacement bulbs.

Read and follow all instructions that are on the product or provided with the

product.

USE AND CARE INSTRUCTIONS

When storingthe product, carefully remove the product from wherever it is

placed, including trees, branches, or bushes, to avoid any undue strain or stress

on the product conductors, connections, and wires.

When not in use, store neatly in a cool, dry location protected form sunlight.

Assembly Instructions

Caution : You must read this before you proceed

ARTIFICIAL CHRISTMAS TREE

Page 1 OF 5

Summary of content (5 pages)

PAGE 1
Assembly Instructions Caution : You must read this before you proceed ARTIFICIAL CHRISTMAS TREE CAUTION : IMPORTANT SAFETY INSTRUCTIONS  The product is for indoor only This seasonal use product is not intended for permanent installation or use. When decorating trees, use miniature light bulb strings or LED light strings only. "C" size bulbs are not recommended. Do not mount or place near gas or electric heaters, fireplaces, candles or other similar sources of heat.
PAGE 2
Part List Label Picture A B Description Top Tree Section (larger Trees include one or more Sections) QTY Metal Tree Stand 1 1 Assembly Steps Step1 A B Each carton container one Top Tree Section(A) or one Bottom Tree Section(larger trees include one or more Middle Sections) and a Metal Tree Stand (B). Unfold a Metal Stand(B) and insert the Eye Bolt. Remove packing material from ends of Poles. Put Bottom Section Pole into Tree stand making sure it is seated properly (Figure 1). Tighten Eye Bolt.
PAGE 3
Shaping Instructions Shaping the Tree Branches is the last step of assembly. The care and attention given to this final process will result in a genuinely beautiful and appealing holiday centerpiece. 1. Every tree style is shipped from the factory with the tips of each Branch compressed to the center(Figure 1). 2.Each Branch tip must be shaped to it's proper position to give the tree a natural look.
PAGE 4
Storage Remove all holiday decorations. Gently press tips back into center Branch. Raise all Branches to original upright position taking care not to place undue pressure on the attached ends of the branches. When disassembling tree, a twisting motion will help to separate the sections from each other. All tree parts can be replaced in carton and should be stored in a cool, dry place. Bulb Replacement Instructions 1.Unplug light string from power source. 2.
PAGE 5
Noble House Home Furnishings LLC Page 5 OF 5