CAUTION: You must read this before you proceed.
No. Picture Description A Backrest Panel B Left Arm Panel With Preinstalled Levellers C Right Arm Panel With Pre-installed Levellers D Seat Panel E Support Bar F Seat Cushion G Back Cushion H Right Back Cushion No.
Before Beginning Assembly: OVERVIEW Back Cushion (G) Backrest Panel (A) Right Back Cush Seat Cushion (F) Right Arm Pan Left Arm Panel (B) Seat Panel (D) Support Bar (E) FRONT FACI Noble House Home Furnishings LLC
This Right Chair has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the Right Chair parts, the above pi to help you put the various parts into perspective. Please read through the instructions herebelow to familiarise the parts and steps before assembl Step 1 Unpack and place all parts on a clean, non-marring surface.
Step 2 Step 2.2 Place the Right Arm Panel (C) with inside face skywards onto a clean, s surface to avoid any scratches or damages to the product. Step 2.1: Align the dowels of Support Bar (E) into the positions in the Ri Panel (C). Then, affix Support Bar (E) with Right Arm Panel (C) by using Bolt (① Key (③).. Step 2.2: Attach the Backrest Panel (A) onto Right Arm Panel (C) by us (①) and Allen Key (③). DO NOT FULLY TIGHTHEN BOLTS. Step 3 Step 3.2 Step 3.
With the help of your adult partner, place Left Arm Panel (B) onto the as frame from Step 2 Step 3.1: Align the dowels of Support Bar (E) into the positions in the Left Panel (B). Then, affix Support Bar (E) with Right Arm Panel (C) by using Bolt (① Key (③). Step 3.2: Attach the Left Arm Panel (B) onto Backrest Panel (A) by us (①) and Allen Key (③). DO NOT FULLY TIGHTHEN BOLTS.
Step 4 Attach the Seat Panel (D) into the Right Chair as shown in picture abov Affix Seat Panel (D) with Corner Chair by using Screws (②) and Allen K Note: Using Screws (②) from inside to outside of Seat Panel (D) DO NOT FULLY TIGHTHEN SCREWS.
Inspect the Right Chair and make sure all parts are adequately connec In a sequential manner, tighten all Screws and Bolts at all joints. With assistance from your adult partners, adjust the Levellers to desire height to avoid wobbles.
Step 6 Turn the Right Chair right side up. Place Seat Cushion (F), Left Back Cushion (G) and Right Back Cushion (H) Seat Panel (D). Inspect it and make sure all parts are adequately connected. Ensure all screws, bolts are fully locked into position and secured. The Right Chair is ready to be used. Caution: This Right Chair can only be used on a flat, level surface.
Step 7 Note: This is optional step in case we want to connect all chairs in a se together and should be done before placing cushion With assistance from your adult partners, up side down the chairs and fixed clip to connect the chairs together Noble House Home Furnishings LLC
Noble House Home Furnishings LLC
ou proceed.
Qty 1 1 1 1 1 1 1 1 Qty 7 5 1 Noble House Home Furnishings LLC
Back Cushion (H) t Arm Panel (C) T FACING Noble House Home Furnishings LLC
nutes to , the above picture is e read through the before assembly.
to a clean, soft n the Right Arm olt (①) and Allen (C) by using Bolts Noble House Home Furnishings LLC
(B) onto the assembled n the Left Arm olt (①) and Allen (A) by using Bolts Noble House Home Furnishings LLC
ture above. ②) and Allen Key (③).
connected. .
Cushion (H) to ured. el surface.
all chairs in a set rs and using pre- Noble House Home Furnishings LLC
Noble House Home Furnishings LLC
