Assembly Instructions Caution: You must read this before you proceed Three Seater Sofa Caution: This Three Seater Sofa is NOT a TOY. Keep your child/children at bay during the assembly process. Whenever lifting or moving the Three Seater Sofa and to prevent injury to yourself or damage to the Three Seater Sofa, two adults are needed to execute these actions.
Part List Label Picture Description Qty A Backrest Panel 1 B Right Arm 1 C Left Arm 1 D Seat Panel 1 E Middle Leg 1 F Seat Cushion 1 G Back Cushion 3 Description Qty ① Allen Key 2 ② Bolt (M6*30mm) 3 ③ Bolt (M6*70mm) 3 ④ Screw (M7*60mm) 3 ⑤ Screw (M7*70mm) 9 Hardware Label Picture Noble House Home Furnishings LLC 2 of 8
Assembly Preparation Before Beginning Assembly: Assembly Steps Overview Back Cushion (G) Right Arm (B) Backrest Panel (A) Seat Panel (D) Left Arm (C) Seat Cushion (F) Middle Leg (E) FRONT FACING This Three Seater Sofa has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the Three Seater Sofa parts, the above picture is to help you put the various parts into perspective.
Step 1 Unpack and place all parts on a clean, non-marring surface. Step 2 2.1 2.2 2.1) With assistance from your adult partners, place the Seat Panel(D) facedown onto a clean, non-marring surface. Attach Middle Leg(E) to Seat Panel(D) by using Bolts(②) with Allen Key(①). 2.2) With assistance from your adult partners, turn the Seat Panel(D) right side up as shown in above picture. Do not fully tighten Bolts.
Step 3 3.1 3.2 With assistance from your adult partner: 3.1) Position Seat Panel(D) between Right Arm(B) and Left Arm(C) as pictured. 3.2) Attach Seat Panel(D) to Right Arm(B) and Left Arm(C) using Screws(⑤) with Allen Key(①). Do not fully tighten Screws. Step 4 Attach Backrest Panel(A) to Right Arm(B) and Left Arm(C) using Bolts(③) and Screws(④) with Allen Key(①) as shown above. Do not fully tighten the Bolts and Screws.
Step 5 Attach Backrest Panel(A) to Seat Panel(D) using Screws(⑤) with Allen Key(①). Step 6 Adjust height for balance Adjust low for Adjust Pre-installed Levelllers height for balance Inspect the Three Seater Sofa and make sure all parts are connected. Gently and gracefully, sit onto to the Three Seater Sofa. This will help to align all the parts at all the joint areas. Then get off the Three Seater Sofa, and in a sequential manner, proceed to tighten all Bolts and Screws.
Step 7 F Place Seat Cushion(F) and Back Cushions(G) onto the Three Seater Sofa. Tie the velcro straps of Seat Cushion(F) and Back Cushions(G) to Seat Panel(D) and Backrest Panel(A) as pictured. Your Three Seater Sofa is ready for use. This Three Seater Sofa can only be used on a flat, level surface.
Noble House Home Furnishings LLC 8 of 8