Instructions / Assembly

Repeat step2 to assemble Backrest(A) and Seat(B) to Right arm with pre-

attached Leveller(C) as pix shown.

Attach Footrest(E) to Side Rail of Right Arm with pre-attached Leveller(C)

and Left Arm with pre-attached Leveller(D) using Bolts(⑤), Spring

Washers(②) and Big Washers(④) by Allen Key(⑥).

DO NOT OVERTIGHTEN.

Turn the Barstool rightside up.

Adjust the pre-installed Leveller until the Barstool is level with the ground.

Then, proceed to tighten all Bolts.

Your Barstool is ready for use.

Caution: This Barstool can only be used on a flat, level surface.

⑤

②

④

Adjust height

for balance

Adjust low for

balance

Noble House Home Furnishings LLC

5 OF 6