Caution : You must read this before you proceed Barstool Label Description QTY A Seat 1 B Legs 1 C Seat Cushion 1 D Back Cushion 1 Noble House Home Furnishings LLC Picture Page 1 OF 5
Label Picture Description QTY ① Bolt M6*20mm 5 ② Spring Washer 5 ③ Washers 5 ④ Allen Key 1 Before Beginning Assembly: Overview Back Cushion(D) Seat (A) Seat Cushion(C) Legs (B) Front Facing This Barstool has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the Barstool parts, the above picture is to help you put the various parts into perspective.
Step 1 Open the carton, and place all parts on a clean, non-marring surface. Place the Seat(A) facedown on the clean, non-marring surface as shown above. Step 2 Swivel Plate have fixed on the Leg part(B). Swivel Plate need attach to the Seat Part(A) Turn the Legs(B) over and place it onto the Seat(A) as shown above. Then turn the Swivel Plate some 45°to the position as shown above. Align the Bolt mouting positions of the Swivel Plate with those on the Seat(A).
Step 3 Ensure that all Bolts and Nuts are securely tightened. Stand the Barstool up. Step 4 Place the Seat Cushion(C) and Back Cushion(D) on the Barstool. Your Barstool is ready for use. This Barstool can only be used on a flat, level surface.
Noble House Home Furnishings LLC Page 5 OF 5