Instructions / Assembly

Lable Picture Description Qty

A Chair Seat 1

B Chair Leg Base 1

Caution : This barstool is NOT a TOY.

Keep your child / children at bay in the process of assembly.

Assembly Instructions

Caution : You must read this before you proceed.

Swivel Barstool

Parts List

Noble house Home Furnishings LLC 1 OF 5

PAGE 1
Assembly Instructions Caution : You must read this before you proceed. Swivel Barstool Caution : This barstool is NOT a TOY. Keep your child / children at bay in the process of assembly.
PAGE 2
Hardware Label Picture Description Qty ① Bolt(M8*50mm） 5 ② Washer( 8mm ) 5 ③ Springs Washer( 8mm) 5 ④ Spanner 2 ⑤ Nut(8mm) 5 Assembly Preparation Before Beginning Assembly: Noble house Home Furnishings LLC 2 OF 5
PAGE 3
Assembly Steps Overview Chair Seat (A) Chair Leg Base (B) FRONT FACING This Barstool has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the Barstool parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly. Step 1 Unpack and place all parts on a clean soft surface.
PAGE 4
Step 2 Place Chair Seat(A) upside down. Align the mountings on the bottom of the Chair Seat(A) with the mountings on the Chair Leg Base(B). Then, attach the Chair Leg Base(B) to the Chair Seat(A) with Bolts(①),Washers(②) and Springs Washers(③) using the Spanner(④). Do this in a sequential manner. Do not over tighten yet. Step 3 Adjust height for balance Adjust low for balance Make sure that the Chair Seat and the Chair Leg Base is fully and firmly attached together as one complete piece.
PAGE 5
Noble house Home Furnishings LLC 5 OF 5