Caution: You must read this before you proceed.
Label Description QTY A Chair Seat 1 B Wooden Leg 4 Description QTY Gasket 4 Label ① Before Beginning Assembly: Picture Picture
Overview Chair Seat(A) Wooden Leg(B) FRONT FACING This Club Chair has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the Club Chair parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly. Step 1 Zip up the Dust Cover.
Place the Chair Seat(A) on a clean, non-marring surface with the bottom facing you, as shown in the picture above. Carefully unzip the Dust Cover at the bottom, and remove the Legs. Zip up the Dust Cover. Step 2 Use Gaskets to Achieve Stability Wooden Leg(B) Wooden Leg(B) Chair Seat(A) Install the Wooden Leg(B) into the Chair Seat(A) by putting a Gasket(①) on the threaded stem of the Leg.
Position the Chair right side up and test for stability. Add or remove Gaskets(①) where needed to achieve stability. Step 4 d Make sure all the parts are connected and securely locked into position and Legs are in the correct positions. After completion of the assembly, the Left Front Leg shall be splayed towards to the Left and the Right Front Leg to the right. The Back Legs should splay outwards and towards the back.
