Instructions / Assembly

Step 3
Place the Chair Seat(A) on a clean, non-marring surface with the bottom
facing you, as shown in the picture above.
Carefully unzip the Dust Cover at the bottom, and remove the Legs.
Zip up the Dust Cover.
Step 2
Install the Wooden Leg(B) into the Chair Seat(A) by putting a Gasket(①) on
the threaded stem of the Leg.
Then insert the threaded stem of the Wooden Leg(B) into the Top Corner
mounting postions of the bottom of the Chair Seat(A).
Affix the Leg by turning it clockwise by hand until secure.
Repeat this process with the remaining three Wooden Legs.
Note: The use of the Gaskets are OPTIONAL and are especially useful
to help alleviate slight wobbles. Some Legs may need more than one
whilst some Legs may not need any.
LEVEL SURFACE
Chair Seat(A)
Wooden Leg(B)
Wooden Leg(B)
Use Gaskets to
Achieve Stability