Instructions / Assembly

Step 4
Make sure all the parts are connected and securely locked into
position and Legs are in the correct positions.
After completion of the assembly, the Left Front Leg shall be splayed
towards to the Left and the Right Front Leg to the right.
The Back Legs should splay outwards and towards the back.
If the Legs do not point in an outward direction, Gaskets can be added or
removed to achieve the nesessary angle.
Your Club Chair is ready for use.
This Club Chair can only be used on a flat, level surface.
Position the Chair right side up and test for stability.
Add or remove Gaskets(①) where needed to achieve stability.
d