Assembly Instructions Caution: You must read this before you proceed Chair Noble House Home Furnishings LLC 1
Parts List No. Picture Description QTY A Left Leg Panel 1 B Right Leg Panel 1 C Backrest Panel 1 D Seat Panel 1 E Back Footrest 1 F Front Footrest 1 G Seat Cushion 1 Description QTY Hardware No.
Assembly Preparation Before Beginning Assembly: Assembly Steps Overview Backrest Panel (C) Right Leg Panel (B) Seat Cushion (G) Left Leg Panel (A) Seat Panel (D) Back Footrest (E) Front Footrest (F) FRONT FACING Noble House Home Furnishings LLC 3
Step 1 Unpack and place all parts on a clean, non-marring surface. Step 2 2.1 2.2 2.1) Insert Backrest Panel(C), Seat Panel(D) and Footrests(E, F) onto Left Leg Panel(A) as shown above. 2.2) Insert Right Leg Panel(B) onto Backrest Panel(C), Seat Panel(D) and Footrests (E, F) as pictured.
Step 3 Attach Right Leg Panel(B) to Backrest Panel(C), Seat Panel(D) and Footrests(E, F) using Screws(②) with Allen Key(①). With assistance from your adult partner, carefully turn the Chair over onto the opposite side. Attach Left Leg Panel(A) to Backrest Panel(C), Seat Panel(D) and Footrests(E, F) using Screws(②) with Allen Key(①). Do not fully tighten the Screws. Step 4 Stand the Chair up, with assistance from your adult partner. Exert pressure floorwards, onto the Chair with both your hands.
Step 5 F Inspect the Chair and make sure all parts are connected. Place Seat Cushion(G) on to the Chair. Lay the Chair down and tie the velcro straps on Seat Cushion(G) to Seat Panel(D) as shown above. Your Chair is ready for use. This Chair can only be used on a flat, level surface.
Questions & Answers about Proposition 65 • What is Proposition 65? Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm. These chemicals can be in the products that Californians purchase, in their homes or workplaces, or that are released into the environment.
