Instructions / Assembly

Step4
Step5
Step4.1:Attach Seat(A) and Backrest (D)to Right Armrest(C) using Bolts(②) with Allen
Key(③) as shown above.
Step4.2:Attach Seat(A) and Backrest (D)to Right Armrest(C) using Bolts(①) with Allen
Key(③) as shown above.
Step4.3:Attach Seat(A) and Backrest (D)to Right Armrest(C) using Bolts(②) with Allen
Key(③) as shown above.
Do not fully tighten the Bolts.
Stand the Single Chair up.
Put Back Cushion(F) and Seat Cushion(E) on the Single Chair, and stick the vercro.
Place the Single Chair on a LEVEL SURFACE.
Inspect it and make sure all parts are adequately connected.
Gently and carefully sit onto the Single Chair
This will help to align all parts at all joints.Then get off the Single Chair, and in a
sequential manner, proceed to tighten all Bolts. When tightening the Bolts, tighten
sequentially.
DO NOT tighten any Bolt fully and then move on to the next one.
This may cause the frame to warp.
If there are still wobbles, loosen the Bolts and execute this same process.
Note: This step is done best with the assistance of a second adult.
Your Single Chair is ready for use.
This Single Chair can only be used on a flat, level surface.
D
A
B
C
D
A
B
C
①
③
setp4.1
setp4.2
②
③
D
A
B
C
setp4.3
②
③
F
E
Noble house Home Furnishings LLC Page 4 OF 5