Instructions / Assembly

Step 9
Step 8
8 OF 10
F
Attach Middle Leg(F) to Foldable Seat Panel(A) using Bolts() and Washers()
with Allen Key() as pictured.
Do not fully tighten the Bolts.
Adjust height for balance Adjust low for balance
1
3
4
Adjust Pre-installed Levellers height for balance
EXERT pressure, floorwards, onto the Seat Panel.
This pressure will help the Legs and Seat Panel reach alignment at all joints.
In a sequential manner, gradually tighten all Bolts at all joints until evenly secured.
With assistance from your adult partners, turn the Lounger right side up.
Adjust the Pre-installed Levellers in Middle Leg(F) to desired height to avoid wobbles.
Assembly Steps
F