Assembly Instructions Caution: You must read this before you proceed Corner Noble House Home Furnishings LLC PAGE 1 OF 12
Parts List Label Picture Description QTY A Left Backrest 1 B Right Backrest 1 C Seat 1 D Seat Cushion 1 E Leg 4 F Metal Bracket 2 Noble House Home Furnishings LLC PAGE 2 OF 12
Hardware Label Picture Description QTY ① Bolt (M8*70mm) 7 ② Washer 9 ③ Gasket 7 ④ Allen Key 1 ⑤ Spring Washer 9 ⑥ Bolt (M8*25mm) 3 Assembly Preparation Before Beginning Assembly: Noble House Home Furnishings LLC PAGE 3 OF 12
Assembly Steps Overview Left Backrest(A) Right Backrest(B) Seat Cushion(D) Leg(E) Leg(E) Seat(C) Metal Bracket(F) FRONT FACING This Corner has multiple parts and may require up to 60 minutes to assemble. To give you an overview of the Corner parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly.
Step 1 Seat(C) Right Backrest(B) Open the carton and place all the parts on a clean, non-marring surface. Attach Seat(C) to Right Backrest(B) using Bolts(①), Spring Washers(⑤), and Washers(②) with Allen Key(④) as pictured above. Tighten the Bolts fully in a sequential manner.
Step 2 Left Backrest(A) Right Backrest(B) Tapered Connectors on left backrest Tapered Connectors on right backrest Seat(C) Align the Tapered Connectors on the Left Backrest(A) with that on the Right Backrest(B). Slip and slide the Backrest, in a gradual and balanced manner into the Tapered Connectors. Push the Left Backrest(A) downwards until it is fully slotted. Note: Fully locked postion: Check and assess that the base of the Left Backrest(A) and Seat(C) are aligned and level.
Step 3 Left Backrest(A) Seat(C) Tilt and lay the Corner on its Right Backrest(B) onto a flat surface. Attach Seat(C) to Left Backrest(A) using Bolts(①), Spring Washers(⑤), and Washers(②) with Allen Key(④) as pictured above. Tighten the Bolts fully in a sequential manner.
Step 4 Metal Bracket(F) Attach the Metal Bracket(F) to the Corner using Bolts(⑥), Spring Washers(⑤), and Washers(②) with Allen Key(④) . Tighten the Bolts fully in a sequential manner.
Step 5 Use Gasket(③）to achieve stability Gasket (③) Leg(E) Right Backrest(B) Leg(E) Install the Leg(E) at the bottom of the Corner by placing one Gasket(③) on the threaded stem. Then insert threaded stem into the threaded mounting postion at the corner of the Corner. Tighten by turning the Leg clockwise. Repeat the same step to install the remaining three Legs. Note: The use of Gaskets are OPTIONAL and are especially useful to help alleviate slight wobbleness.
Step 6 Seat Cushion(D) Place the Seat Cushion(D) onto the Corner. Your Corner is ready for use. This Corner can only be used on a flat, level surface.
Additional Steps Step 1 Connect the Sofas by intersecting the metal brackets. Make sure all parts are connected and securely locked into position. Step 2 Your Sofa Set is ready for use. This Sofa Set can only be used on a flat level surface.
Noble House Home Furnishings LLC PAGE 12 OF 12
