Assembly Instructions Caution: You must read this before you proceed Single Chair Part List Label Picture Description QTY A Seat 1 B Back 1 Description QTY ① Bolt (M6*35mm) 5 ② Allen Key 1 Hardware Label Picture
Assembly Preparation Before Beginning Assembly: Assembly Steps Overview Back (B) Seat (A) FRONT FACING This Chair has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the Chair parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly.
Step 1 A B ① ② Open the carton and place all the parts onto a clean, non-marring surface. Attach Seat(A) to Back(B) using Bolts(①) with Allen Key(②) as shown above. Do not fully tighten the Bolts. Step 2 B A ① ② Attach Seat(A) to Back(B) using Bolts(①) with Allen Key(②) as shown above. Tighten all Bolts at all joints in a sequential manner. Your Chair is ready for use. This Chair can only be used on a flat, level surface.
