Instructions / Assembly

Step 1
Open the carton and place all the parts onto a clean, non-marring surface.
Attach Seat(A) to Back(B) using Bolts(①) with Allen Key(②) as shown above.
Do not fully tighten the Bolts.
Step 2
Attach Seat(A) to Back(B) using Bolts(①) with Allen Key(②) as shown above.
Tighten all Bolts at all joints in a sequential manner.
Your Chair is ready for use.
This Chair can only be used on a flat, level surface.
A
B
②
A
B
①
②
①