Instructions / Assembly

Step 6
Noble House Home Furnishings LLC Page 6 OF 8
Place the barstool on a LEVEL SURFACE to check for wobbles.
If it wobbles lift the barstool to some 20cm to 30cm height from the ground.
Keep your feet and toes well away from the drop zone.
Drop the barstool freely and vertically with the four legs, hitting the ground, all at the same time.
This Drop Test will help to ensure that all the bolts and gaps reach full alignment status.
Test again for evenness on a LEVEL SURFACE.
If no wobbles are found, slowly and steadily turn the barstool upside down.
Then proceed to tighten all bolts in a sequential manner.
CAUTION : When tightening these bolts, tighten sequentially.
DO NOT tighten any bolt fully and then move on to the next one.
This could cause the frame to warp.
If it still wobbles after tightening, loosen the bolts and execute th esame drop test again.
WARNING!! IF THE BARSTOOL IS NOT STABLE , IT COULD LEAD TO DAMAGE OF THE
PRODUCT.