Caution : You must read this before you proceed Remind: Umbrella open diameter max. 78 inches Umbrella Base Umbrella Base Weight : Appr.
Label Picture Description QTY A Umbrella Base 1 B Support Pole 1 C Adjustable Screw 1 D Cap 1 E Adapter (For 38mm parasol pole) 1 F Adapter (For 48mm parasol pole) 1 Before Beginning Assembly: Page 2 OF 5
WARNING : AVOID CHOKING / CHOKING HAZARDS : Do not allow children to play with plastic wraps and / any small parts in this package. Notice: As a safety precaution, when umbrella is not in use please turn down umbrella. Remove Umbrella from this base and store in safe location This base is NOT suited and NOT recommended to be used as a free-standing Umbrella Base. This base must be used under a matching table and matching Umbrella size.
Step 1 (B) (A) Screw Support Pole (B) into Umbrella Base (A). Step 2 (B) Screw Adjustable screw (C) into Support Pole (B). Step 3 A (D) (E) (F) (B) For the Umbrella pole with diameter as 38mm, use dia.38mm Adaper (E) & dia.48mm Adapter (F) added together, insert the dia.48mm Adapter (F) into the Support Pole (B) firstly, and then put the dia.38mm Adapter (E) onto the dia.48mm Adapter (F), Turn the Cap (D) onto the Support Pole (B) to hold the Adapters in place.
Step 3 B (D) (F) For the Umbrella pole with diameter as 48mm, use dia.48mm Adapter (F) only, insert the dia.48mm Adapter (F) into the Support Pole (B), Turn the Cap (D) onto the Support Pole (B) to hold the Adapters in place. The Umbrella base is fully assembled and ready for use. Caution: This Umbrella Base only be used on a flat, level surface.
