Caution : You must read this before you proceed RECLINING CHAIR CAUTION : This chair is NOT a TOY. Keep your child / children at bay during the assembly process. For moving the chair and to prevent damage to the chair, two adults are needed to execute this action.
Label Description QTY A Seat Panel 1 B Front Leg 2 C Backrest 1 D Left Armrest 1 E Right Armrest 1 F Back support 2 G Foot Rest 1 H Foot Baffle 1 Noble House Home Furnishings LLC Picture Page 2 OF 8
Label Picture Description QTY ① Bolt (M6X50mm) 5 ② Bolt (M6X70mm) 9 ③ Bolt (M6X35mm) 4 ④ Bolt (M6X43mm) 5 ⑤ Nut (M6mm) 9 ⑥ Washer 9 ⑦ Nut 5 ⑧ Spanner 1 ⑨ Allen Key 1 Before Beginning Assembly: *5 *9 *4 *5 Noble House Home Furnishings LLC Page 3 OF 8
Overview Backrest (C) Right Armrest (E) Left Armrest (D) Back Support (F) Foot Rest (G) Seat Panel (A) Foot Baffle (H) Front Leg (B) This Chair has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the chair parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly.
Step2 BA 2.5:1 Attach the Left Armrest(D) to the Front Leg(B) by using a Bolt(③), a Washer(⑤), and a Nut(④) with the Spanner(⑧) and the Allen Key(⑨). Repeat the same process with the Right Armrest(E). Do not fully tighten the Bolts. Step3 ② ⑨ ② ⑨ Attach the Left Armrest(D) to the Backrest(C) using a Bolt(②) with the Allen Key(⑨). Repeat the same process with the Right Armrest(E). Do not fully tighten the Bolts.
Step4 Attach the Backrest(C) to the Seat Panel(A) using Bolts(②) with the Allen Key(⑨) Do not fully tighten the Bolts. Step5 BA 3:1 B Attach the Back Support(F) to the Seat Panel(A) using Bolts(①), Washers(⑥), and Nuts(⑤) with the Spanner(⑧) and the Allen Key(⑨). In a sequential manner, tighten all Bolts and Screws at all joints until fully locked into position.
Step6 Attach the Foot Baffle(H) to the Foot Rest(G) using Bolts(③) with the Allen Key(⑨). Do not fully tighten the Bolts. Step7 Then raise the front leg of the chair and put the footrest into the chair at a 45degree angle. In a sequential manner, tighten all Bolts and Screws at all joints until fully locked into position. Your Chair is ready for use. This Chair can only be used on a flat, level surface.
Noble House Home Furnishings LLC Page 8 OF 8