Instructions / Assembly

Step 3
Open the carton and place all the parts onto a clean, non-marring surface.
Attach Chair Back(A) to Chair Seat(B) using Bolt(②) and Washer(③) with Allen Key(①) as shown
above.
Only loosely tighten Bolts.
ATTENTION: There may be some PE wicker that may have covered the Mounting Points. To
ease assembly, guide and slide the PE wicker away from these Mounting Points.
DO NOT CUT AWAY ANY PE WICKER as this would cause the wicker to unravel!
Attach Side Plate(C) between the Chair Back(A) and Chair Seat(B) using Bolt(②) and
Washer(③) with Allen Key(①) as shown above.
Only loosely tighten Bolts.
Step 2
Noble house Home Furnishings LLC 4 OF 7